Fly Ash Bricks are manufactured using thermal power station’s fly ash, sand / quarry fines, lime and gypsum.Fly ash is having ceramic properties and pozzalanic properties. These properties help to get superior quality bricks.These properties help during building construction.The manufacturing process is an automated process which control the raw material ratios, uniform mixing, uniform and specified pressing loads which assures uniform quality bricks.

• Fly ash
• Sand/stone dust
• Lime
• Gypsum
• Cement

Production process of fly ash bricks does not involve sintering where as normal burnt clay bricks involve sintering. So there is no burning of fossil fuel required in the manufacturing of Fly ash bricks. So Co2 emission problem is not there in the manufacturing of Fly ash bricks and contributes to the reduction of greenhouse gas emissions.

Use less energy » Much energy is consumed in firing clay bricks in kilns. By using fly ash bricks instead of clay bricks, much energy is saved in brick manufacturing.

Reduce air pollution » Fossil fuel is used in heating clay bricks in kilns. Burning such fuel generates air pollution and greenhouse gas (CO2), contributing to global warming. Fly ash bricks are manufactured at room temperature and there is no fossil fuel burning and emission of green house gas (Co2)

Some of the Advantages of our fly ash bricks are :

• {Low water absorption}
  Due to lower water penetration, water through bricks is considerably reduced.(steady state flow of water )
• {Eco friendly}
  Air Pollution is reduced.
• {Dimensional accuracy}
  Due to uniform size of bricks mortar required for joints and plaster reduces almost by 50%.
• {High compressive strength}
  Due to high strength, practically no breakage during transport and use.